Industrial Solutions
Cable management, earthing, and structural systems engineered for the specific demands of each industrial sector — from data centres to refineries to power plants. IS & IEC compliant, manufactured in Howrah since 1972.
Cable Trays for Data Centres
Data centres require clean, high-density cable routing with EMI separation and easy reconfiguration. Perforated and ladder cable trays — powder-coated or pre-galvanized — provide structured overhead and under-floor pathways for power and data cabling, compliant to IS 12352 and IEC 61537.
Cable Trays for Oil & Gas Refineries
Refineries demand heavily galvanized, corrosion-resistant cable trays for hazardous, chemically aggressive environments. Hot-dip galvanized ladder and perforated trays per IS 2629 / ASTM A123 carry power and instrumentation cabling across process units, compliant to IS 12352 and IEC 61537.
Cable Trays for Steel Plants
Steel plants need heavy-duty ladder cable trays that withstand high ambient heat, mechanical load, and dust. Hot-dip galvanized ladder trays carry heavy power cabling across rolling mills, furnaces, and material-handling areas, compliant to IS 12352 and IEC 61537.
Cable Trays for Metro Rail
Metro rail systems route signalling, power, and communication cabling through tunnels, stations, and depots using fire-rated, galvanized cable trays and raceways compliant to IS 12352 and IEC 61537, with robust earthing per IS 3043.
Cable Trays for Power Generation
Thermal, hydro, and nuclear power plants route heavy power and control cabling on hot-dip galvanized ladder cable trays across turbine halls, boiler areas, and switchyards, compliant to IS 12352 and IEC 61537 with comprehensive earthing per IS 3043.
Earthing & Lightning Protection for Oil & Gas Refineries
Refineries require comprehensive earthing and lightning protection to prevent static-discharge ignition and equipment damage. Copper-bonded earth rods, GI earth strips, and IEC 62561 lightning protection systems provide low-resistance grounding across hazardous process areas, compliant to IS 3043.
Earthing & Lightning Protection for Data Centres
Data centres need high-integrity, low-impedance earthing to protect sensitive electronics and ensure signal reference integrity. Copper-bonded earth rods, copper earth strips, and equipotential bonding networks provide clean grounding compliant to IS 3043 and IEC 62561.
Earthing & Lightning Protection for Power Substations
Substations require an extensive earth grid to safely dissipate fault and lightning currents, control step/touch potentials, and protect equipment. GI/copper earth strips, earth electrodes, and IEC 62561 lightning protection form the grounding system compliant to IS 3043.
Solar Mounting Structures for Solar & Renewables
Utility-scale solar parks require hot-dip galvanized ground-mount module mounting structures engineered for site wind loads and 25+ year outdoor life, compliant to IS 875 (wind) and IS 2629 (galvanizing).
Lightning Protection for Industrial Plants
Industrial plants protect against lightning strikes with IEC 62561-compliant systems: air terminals, down conductors, and a dedicated earth-termination network that safely conducts strikes to ground, integrated with the plant earthing per IS 3043.
Transmission Line Towers for Power Transmission
Power utilities require hot-dip galvanized lattice transmission line towers from 33 kV to 765 kV, engineered to IS 802 for structural loads and IS 875 for wind, with galvanizing per IS 2629 for 25+ year service.
Cable Trays for Cement
Cement plants route power and control cabling on hot-dip galvanized cable trays that withstand heavy dust, abrasion, and high ambient temperatures across kilns, mills, and material-handling areas, compliant to IS 12352 and IEC 61537.